EdilKamin FANTASY Instalación Uso Y Mantenimiento página 26

PRINCIPLE OF OPERATION
resistance (E) and drawn into the combustion chamber by a
air to heat adjacent rooms.
nium pipes must be connected.
are all controlled by an electronic control board, which is
equipped with Leonardo software to achieve high combustion
®
which all phases of operation can be displayed and controlled.
remote ignition (e.g. remote telephone, local thermostat).
of cast iron.
F
-
-
-
M
A
B
E
C
G
- 26
-
SAFETY INFORMATION
The stove is designed to heat, through automatic pellet com-
bustion in the hearth, the room where it is installed, both by
radiation and the air that comes out of the front grille.
children, with reduced physical, sensorial or mental abilities.
Children must be supervised to ensure they do not play with
the appliance.
to non-compliance with installation instructions, direct contact
parts (glass, pipes, hot air output), when extraneous substances
or non-recommended fuel are introduced, or due to incorrect
maintenance.
for fuel.
devices that guarantee automatic shutdown. These are activated
without any intervention required.
accordance with the instructions given herein and the door
must not be opened during operation: combustion is fully
automatic and requires no intervention.
entered into the hearth or hopper.
COLD.
(e.g. GlassKamin Edilkamin) and a cloth.
ce centre) in accordance with the instructions provided here
within; this is an essential requirement for the validation of the
guarantee.
become very hot (do not touch without wearing the thermal
glove).
stove.
the stove is installed, nor the air inlets of the stove itself.
with wet hands.
and air supply and outlets) for the stove to function correctly
and safely.
Should ignition fail, DO NOT re-ignite until you have
emptied the combustion chamber.
-
-