EdilKamin FANTASY Instalación Uso Y Mantenimiento página 40

This provides a reference indicator. Greater precision is
Edilkamin does not accept any responsibility for differences
from what is indicated (which may be due to external factors).
this comfortable and simple adjustment feature, as standard in
this line of products, allows you to manage the stove power
based on the environmental temperature.
can use this function to switch off the stove when it reaches the
case remain unchanged.
environmental temperature, the stove switches off and then
switches on again independently when the temperature drops.
synoptic panel or on the remote control, you can set the display
to the desired environmental temperature. So we will have the
following situations:
switches on independently, modulating the power automatical-
ly.
from the remote control; the remote control transmitter must
be visually aligned with the receiver of the synoptic panel.
switches to use of its on-board temperature sensor and conti-
nues thus until the connection with the remote is restored
another temperature control system is available as an alterna-
stat serial port to your home thermostat or any (clean output
contact) easily available one.
INSTRUCTIONS FOR USE
-
-
-
- 40
serial port of the thermostat under the following conditions:
With environmental temperature lower than the thermostat
setting (contact closed), the stove modulates power normally to
follow the set temperature
-With environmental temperature reached by the thermostat
(contact open), the stove switches to stand-by mode.
provided by the
remote control
parameter
parameter
serial port no connection
-
provided by
(factory setting)
environmental
thermostat
with blue
no connection
serial cable