EdilKamin FANTASY Instalación Uso Y Mantenimiento página 38

MIMIC PANEL
it gives access to the various programming menus.
increases the various settings
decreases the various settings
Loading the feed screw.
Should the pellet hopper empty completely the feed screw
taneously for a few seconds (on the remote control or synoptic
due from accumulating.
preset time for the ignition process: its duration will be automa-
tically shortened if the control board detects that certain tests
INSTRUCTIONS FOR USE
-
-
- 38
Manual ignition
resistance to become red hot - or if the resistance is temporarily
Manual: the user sets the desired operating power (from
then sets itself to Power 1.
With the stove in operation mode or on standby, press and
With the stove in operation mode or on standby, rotate the
all powers).
-