The preset position can be specified for a tilt range of between 0° and 90°.
Those presets that are out of a tilt of 90° can not be specified.
If you try to specify a preset position for a range exceeding a tilt of 90° using a
controller (SSC-1000, 2000 or 5000), you will see a message of <SET AGAIN> on
the screen. If this is the case, try again for a range below a tilt of 90°.
If you upload/download the menu setting using SSC-1000, 2000 or 5000, the preset
may differ from the menu setting so define the preset again after the operation.
AUTO SET
You can set the AUTO PAN, PATTERN, and AUTO PLAY.
M
If you upload/download the menu setting using SSC-1000, 2000 or 5000, the
settings for AUTO PAN, PATTERN, SCAN, and PRESET may differ from the menu
settings so define them again after the operation.
Auto Pan Setup
Set the starting and ending positions to patrol between points at specified speed.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)
1.
Select <mAIN mENU>-<AUTO SET>.
2.
Select the number of <AUTO PAN>.
AUTO PAN setup screen appears.
MAIN MENU
PROFILE
CAMERA SET
INTELLIGENCE
PRIVACY ZONE
PRESET
AUTO SET
ZONE SET
ALARM SET
CLOCK SET
OTHER SET
AUTO SET
AUTO PAN
1
PATTERN
SCAN
1
AUTO PLAY
English _
2
3
4
1
2
3
2
3
4
OFF