Be Cool fit Manual De Instrucciones página 18

EN
5. Pull the central adjuster to proper position
6. Gear 1 to Gear 4 are optional for forward facing
(76-105 cm) (rearward facing)
A- Kindly read the car manual about the isofix anchor
point.
(Note: not all the car seat have the isofix anchor point,
the child restraint system can not use if without the
fixture)
7. Connect the isofix guider with the fixture (optional)
8. Release the isofix of two sides to longest
9. Holding the baby car seat and connect the isofix
with the fixture
(76-105 cm) (Isofix + support leg + har-
ness) forward facing
10. It means locked when hear click
11. Make sure the Indicator at same gear
12. You have to restart the connection if the indicator
is red
34
13. Push the baby car seat next to backrest of the car
seat tightly
14. Pull the baby car seat to make sure the isofix
locked
15. Make sure the isofix anchor is fixed
16. Make sure the car seat is installed correctly
17. Pull the strap adjuster
18. Pull the shoulder belts meanwhile
19. Press the red button to disengage the buckle
20. Leave the harness to two side and put baby into
car seat
21. Adjust the headrest ring
22. Adjust the proper height for the baby head
23. Incorecct height is unsafe
24. Engage the buckle
25. Pull down the adjust strap to proper length
26. Make sure the space between the child and the
shoulder belt is one hand of thickness
3. REMOVE COVER
1. Hide the harness and take apart the pad
2. Take apart the cloth cover on head rest
3. Undo the button and take apart the cloth cover
below the head rest
4. Undo the button and take apart the cloth cover
below the head rest
5. The opposite way is how to put on the cloth cover
EN
35