Clatronic DVD 593 Instrucciones De Servicio página 29

5....-05-DVD 593 NEU GB 08.03.2004
Audio Setup
• Press UP/DOWN button to select the AUDIO SET UP
and press ENTER.
– The left is the main catalog, the right is the children
catalog.
• Press LEFT/RIGHT button to enter the children cata-
log and press ENTER to confirm.
1. Set up the AUDIO OUTPUT
– SPDIF/PCM when connect the 2 channels digital ana-
log or stereo analog AUX, playback the DOLBY digital
disc, please select this funtion.
– SPDIF/RAW when the digital audio output connection
with the DOLBY decode function power amplify, plea-
se select this function.
NOTES: When using built-in amplifier, audio output must
set to analog, otherwise rear and center speaker will no
signal output. When set to SPDIF/RAW or SPDIF/PCM,
5.1 signal may through digital out to external
amplifier.show or hide the captions.
• Press UP/DOWN button to select SPDIF OUT, then
press ENTER.
• Press UP/DOWN button to select OFF, SPDIF/RAW,
or SPDIF/PCM, then press ENTER.
• Choose OFF if you used built-in amplifier.
• Choose SPDIF/RAW if you connected to a Stereo
using the Player's COAXIAL Digital Audio Out jacks
and your Stereo is PCM-compatible.
2. Set up the COMPRESSION
– Dynamic Range Compression
Dynamic Range Compression reduces volume chan-
ge by letting you adjust the difference between soft
and loud sounds.
Press UP/DOWN button to set Dynamic Range Com-
pression to 1/8 through FULL or to turn it OFF, then
press ENTER.
To hear the full range of range of sounds as recorded,
choose OFF or a lower ratio such as 1/8 or 2/8. To mi-
nimize the difference in volume between lound
segments and quiet scenes, choose a higher ratio
such as 6/8 or FULL.
11:55 Uhr Seite 29
3. Set up the PRO LOGIC
– PROG LOGIC ON
Select this item, all 2 channel signal playback disc
with the PRO LOGIC decode system to 5.1 channel.
This function must set the DOWNMIX to OFF.
– PRO LOGIC OFF
Pro Logic is switched off.
– PRO LOGIC AUTO
Function is switched automatically.
4. Set up the LPCM OUTPUT
LPCM 48K:
In the linear PCM setting "48K" means that the maximum
"Digital Output Sampling Rate" is 48 KHz. If the encoded
sampling rate of the title track is 96 KHz the output is for-
cibly converted to 48 KHz.
LPCM 96K:
If "96K" has been selected the maximum output sampling
rate is 96K and no enforced conversion takes place.
Preference Setup
(Only in the STOP mode or open the tray.)
Press UP/DOWN button to select the PREFERENCES
SET UP and press ENTER.
– The left is the main catalog, the right is the children
catalog.
Press LEFT/RIGHT button to enter the children catalog
and press ENTER to confirm.
1. Set up the VIDEO (TV Type)
Please adjust the Video Out in this way, that he meets the
system of the TV, the model will be connected to.
1. If you are using a PAL television set, select the PAL
output signal;
2. If you are using an NTSC television, select the NTSC
output signal;
3. Select MULTI if your television set has a multisystem.
29