MEGABRAS MD-5060x Manual De Uso página 10

When activated, it allows to program the
Operation Mode (Normal, SVT1, SVT2 or
TIMER).
When activated, it allows to program the limit of
the "Pass-Fail test".
Turns On/Off the printer.
Paper feed – used to change the paper reel.
Increase the value that is being programmed.
Decrease the value that is being programmed.
Starts the test.
End of test.
2.3. Display
Alphanumeric LCD where the measurement result, the corresponding
measuring unit, the elapsed time since the measurement started, the
analogue indication by means of a bargraph and messages to the
operator are displayed (in English).
Indicates Operation
Mode is enabled.
Indicates LIM function
is activated.
The printer is
activated.
Indicates that the test
is being carried out.
11
-
-
-
-