MEGABRAS MD-5060x Manual De Uso página 11

2.4. High voltage indicator
A light indicator warns the occurrence of high voltage on
the output terminal during the measurement and keeps lit
until the discharging process has been completed.
3. Power supply
This equipment is powered by an internal rechargeable LFP battery
(LiFePO4 12 V - 3000 mAh) or mains supply (through the AC Adapter).
3.1. Battery status
The battery level is indicated by an icon located at the top-left corner of
display.
If the battery has less than 20% charge, the message LOW BATTERY will
start blinking in the display.
12