MEGABRAS MD-5060x Manual De Uso página 16

5.2. Selection of the operation mode
The MD5060x insulation tester has five operation modes: Normal, with
"TIMER", SVT1, SVT2 and "Pass / Fail test". The first four modes are
selected using the
pressing key.
5.2.1. "TIMER" Mode
The use of key allows the MD5060x setting for the performance of a
pre-set - duration test; when this mode is selected, the display shows the
programmed time. Use
tests in 30 seconds, 1 minute, 3 minutes, 10 minutes, 30 minutes or 90
minutes.
key; the "Pass/ Fail test" mode is activated
and keys to define the duration of the
 
10k 100k 1M 10M 100M 1G 10G
 
 
10k 100k 1M 10M 100M 1G 10G
 
 
10k 100k 1M 10M 100M 1G 10G
 
 
10k 100k 1M 10M 100M 1G 10G
 
 
10k 100k 1M 10M 100M 1G 10G
 
 
10k 100k 1M 10M 100M 1G 10G
 
17
100G 1T
100G 1T

100G 1T

100G 1T

100G 1T

100G 1T
