MEGABRAS MD-5060x Manual De Uso página 15

5. Tests definition
5.1. Test voltage definition
In order to define the test voltage value, first it is necessary to select one
of voltage adjustment keys:
programmed voltage selection (
keys which increase or decrease the value of the step voltage test for
100 V or 500 V, depending on the selected voltage adjustment key. As
long as the equipment is on, the voltage adjustment key
selected. Press again the adjustment key selected at the moment to
leaving the test voltage selection mode.
10k
 
10k
 
10k
 
10k
 
Note: Test voltage is the only parameter that can be modified during
tests.
or
 
100k 1M 10M 100M 1G 10G 100G
 
100k 1M 10M 100M 1G 10G 100G
 
100k 1M 10M 100M 1G 10G 100G
 
100k 1M 10M 100M 1G 10G 100G
16
. These keys enable both the pre-
) and the
1T

1T

1T

1T

and
will be