Dreame V12 Pro Manual Del Usuario página 16

How to Use
Cleaning Mode
There are two working methods for the vacuum, which can be selected based on your own
needs.
Method 1: Discontinuous Cleaning Mode
Press and hold the switch of the vacuum to enable this mode, and release it to stop
immediately.
Method 2: Continuous Cleaning Mode (Electronic Lock)
Click the electronic lock key to switch to Continuous Cleaning Mode, and then briefl y press
the on/off switch to keep the vacuum in Continuous Cleaning Mode.
Use the electronic lock to free your fi nger from fatigue caused by holding the switch.
Note:
• In this mode, briefl y press the on/off switch to suspend the operation or start again and
the working mode of the vacuum will not change.
• Click the electronic lock again to quit Continuous Cleaning Mode.
EN
11