Publicidad
Idiomas disponibles
Idiomas disponibles
Care & Maintenance
EN
Cleaning the Cyclone Assembly
1. Rotate the cyclone assembly in the direction as illustrated to unlock it, then remove the
cyclone assembly.
Note: Use the 2-in-1 brush nozzle to remove cyclone separator from the housing. Turn the
nozzle in the direction as shown in the diagram for a thorough cleaning.
2. Rinse the cyclone assembly with water until it is clean. Thoroughly dry the cyclone
assembly.
Note: Keep it in a ventilated or cool place for at least 24 hours.
16
2
1
3
12
11
1
10
2
24 hrs
9
3
8
4
7
5
6
Publicidad
