Dreame V12 Pro Manual Del Usuario página 22

Care & Maintenance
Cleaning the Filter Assembly
1. Place the vacuum securely on a flat surface, then turn the filter assembly cover in the
direction indicated and remove the filter assembly.
Note: Remove the built-in foam pad before cleaning the filter assembly.
2
2. Rinse the filter and foam pad with water. To thoroughly remove all the dust caught in
the filter, rotate the filter 360 degrees while rinsing. Lightly tap the filter against a sink
several times to remove any excess debris. Keep the filter in a well-ventilated and cool
place to fully dry.
Note: Fully dry the filter (at least 24 hours) before reinstalling it.
1
3
11
10
9
8
7
EN
12
1
2
24 hrs
3
4
5
6
17