AKG PT 4000 Modo De Empleo página 20

3 Setting Up
3.6.2 Frequency Menu
20
Push the jog switch briefly. The transmitter will stay tuned to the original frequency and the display will
revert to the following screen:
10.To switch the transmitter into LOCK mode:
- Push and hold the ON/OFF button until the message "oFF" appears on the display. After approx. 1/2
second, the display will go dark as power to the transmitter is switched off.
- Switch the transmitter ON in LOCK mode, referring to section 3.4.2.
- To enter SETUP mode:
Push and hold the jog switch until the "LOCK" label disappears and one or more of the readouts in
the current menu start flashing.
1. To move from the Preset to the Frequency menu, turn the jog switch briefly to the left. The display will
change like this:
2. To increase the frequency by 25 kHz, turn the jog switch briefly to the right.
To decrease the frequency by 25 kHz, turn the jog switch briefly to the left.
3. Having set the desired frequency, push the jog switch briefly. This brings up the following screen:
4a If you want to save the selected frequency, push the jog switch briefly. Your setting will be saved in
memory and the display will change as follows:
4b If you'd rather not save the selected frequency, briefly turn the jog switch to the left or right.
This brings up the following screen: