Publicidad
Idiomas disponibles
Idiomas disponibles
Setting mode
The settings for this unit are divided into two groups: Settings 1 and
Settings 2.
The Settings 1 or Settings 2 group will be shown depending on how
the MODE button is pressed.
1
2
Changing settings
1
When stopped or during playback, press and
hold the MODE button.
Press and hold
Settings 1 will be shown.
To show Settings 2, press and hold the MODE button again
while Settings 1 is shown.
2
Press the MODE button repeatedly to select the
item to change.
Each time you press the MODE button, the item shown on the
display changes as follows.
24
4
3
3
4
Settings 1
Settings 2
UPC>
PCMM>
c
CLK>
PCMG>
c
AOUT>
DSDF>
c
DOUT>
RS232C>
c
DPaOFF>
AUD_UPDATE
c
APS>
o Depending on the selected source and operation status,
some items might not appear.
o If you do nothing for ten or more seconds, setting mode will
end and ordinary display will resume.
However, setting mode will not end when Settings 2 AUD_
UPDATE is in use.
Use the skip (.//) buttons to change
settings.
To change multiple items, repeat steps
Press the Stop (8) button.
Setting mode will end and the ordinary display will reappear.
o Setting mode will also end and the ordinary display will reap-
pear if nothing is done for ten seconds. However, setting
mode will not end when Settings 2 AUD_UPDATE is in use.
o Settings are retained even if the power plug is disconnected.
c
c
c
c
2
3
and
.
Publicidad
