RECARO C 6000 Manual De Montaje página 35

C
1
4. Loosen and remove both nuts (1) in the floor of the vehicle at the front.
5. Now move the seat as far forward as possible.
6. Loosen and remove the four screws (2) in the floor of the vehicle at the rear.
D
1
7. Unlock the seat rails and then manually slide both bottom rails (1) into the centre position.
8. Activate the express down mechanism.
9. Vent the vehicle's air system.
Warning (risk of entrapment):
There is a risk of your fingers being crushed or trapped when lowering the seat and moving the
bottom rails!
RECARO Automotive Seating
2
1 Front nuts
2 Rear screws
K0240
1 Bottom rails
K0241
Page 10 of 25