Removing The Standard Seat - RECARO C 6000 Manual De Montaje

3.3 Removing the standard seat

Caution:
Before starting the removal process, check to ensure that your vehicle is parked safely and that
you will always have a good foothold whilst carrying out the work.
Important note:
Remove the standard seat together with seat rails and the belt lock from the vehicle.
The new screws supplied in the kit must always be used to secure the RECARO seat in place.
A
1
1. Open the flap of the storage compartment to access the nuts.
B
2. Move the steering wheel as far forward as possible.
3. Move the backrest into the vertical position and the seat into the rearmost and highest position.
RECARO Automotive Seating
2
1 Storage compartment
K0259
Steering wheel adjustment - front
Standard seat adjustment - rear, top
Page 9 of 25