Installation, use and maintenance manual
---- - WOOD BURNING STOVES
●
The combustion chamber must be kept closed, except when loading or removing residues, in order to prevent smoke
egress.
●
Do not use the appliance as waste incinerator or for any other purpose other than the intended one.
●
Do not use liquid fuels.
●
Do not modify the appliance without prior authorisation.
●
Use only original spare parts recommended by the manufacturer.
●
Make sure that the stove is transported in compliance with safety regulations. Avoid any improper transfers or knocks that
may damage the ceramics or the structure.
●
The metal structure is coated using high temperature paints. When using the appliance for the first few times, unpleasant
odours may be given off due to the paint of the metal parts that is drying: this is in no way dangerous and in such case,
simply ventilate the premises. After the first heating cycles, the paint will reach its maximum adhesion and all its chemical
and physical features.
●
In case of glass breakage after an accidental collision, do not use the product.
●
It is also possible that the product may undergo slight deformations, as the structure is made of steel, and therefore slight
noises or crunches may be heard. This is absolutely normal and should not be considered a defect.
ATTENTION
ATTENTION
If the stove is not properly installed, power outages may result in fume spillages. In some cases, it may be necessary
to install an uninterruptible power supply.
ATTENTION
ATTENTION
Being a heating appliance, some parts of the stove can become extremely hot. For precisely this reason, we advise
that you take extreme care during operation.
WHEN THE STOVE IS OPERATING:
WHEN THE STOVE IS OPERATING:
●
do not touch the door glass since it becomes extremely hot;
do not touch the door glass since it becomes extremely hot;
●
keep children away from it;
keep children away from it;
●
do not touch the fume outlet;
do not touch the fume outlet;
●
do not pour any liquid inside the firebox;
do not pour any liquid inside the firebox;
●
do not perform any maintenance operations if the stove is not cold;
do not perform any maintenance operations if the stove is not cold;
●
only qualified technicians are allowed to perform any operation;
only qualified technicians are allowed to perform any operation;
●
follow all the instructions contained herein.
follow all the instructions contained herein.
ATTENTION
ATTENTION
IN CASE OF FIRE:
●
Close the firebox door and the ash drawer.
●
Close the comburent air adjustment devices.
●
Use sand or coarse salt in handfuls, and not water, to extinguish the fire; Use powder CO2 extinguisher.
●
Remove objects and furniture.
●
Call the fire-fighter service.
83103600 - 1.0 - 14/12/2022
EN
EN
5 5