EVA Stampaggi EVSL8 Manual De Instrucciones página 39

Installation, use and maintenance manual
---- - WOOD BURNING STOVES
4.7 4.7 CONNECTION TO THE FLUE PIPE CONNECTION TO THE FLUE PIPE
THE LENGTH OF THE FUME DUCT PIPE MUST HAVE A DIAMETER EQUAL TO OR GREATER THAN THAT THE LENGTH OF THE FUME DUCT PIPE MUST HAVE A DIAMETER EQUAL TO OR GREATER THAN THAT
SPECIFIED FOR EACH APPLIANCE. EVERY 90° ELBOW OR (T) COUPLING IS THE EQUIVALENT OF 1 METRE SPECIFIED FOR EACH APPLIANCE. EVERY 90° ELBOW OR (T) COUPLING IS THE EQUIVALENT OF 1 METRE
OF PIPE. OF PIPE.
IN ORDER TO GUARANTEE CORRECT EFFICIENCY OF THE STOVE, ENSURE THE FOLLOWING TYPES OF IN ORDER TO GUARANTEE CORRECT EFFICIENCY OF THE STOVE, ENSURE THE FOLLOWING TYPES OF
INSTALLATION BEFORE CONNECTION TO THE FLUE PIPE: INSTALLATION BEFORE CONNECTION TO THE FLUE PIPE:
INSTALL THE PRODUCT WITH AT LEAST 1 (T) COUPLING OR 1 METRE OF CERTIFIED PIPE ACCORDING TO INSTALL THE PRODUCT WITH AT LEAST 1 (T) COUPLING OR 1 METRE OF CERTIFIED PIPE ACCORDING TO
EN 1856-2 EN 1856-2
PASSAGE OF FLAMMABLE WALLS PASSAGE OF FLAMMABLE WALLS
When drilling the hole for the passage of the exhaust pipe it is necessary to take into account the possible presence
of flammable materials. If the hole must pass through a wooden wall or in any case a wall made of thermolabile
material, the installer must use a wall connection and adequately insulate the pipe of the product that passes through
it using suitable insulating materials (1.3 - 5 cm thick with a minimum thermal conductivity of 0.07 W/m°K).
The same minimum distance must be respected even if the exhaust pipe has to pass through vertical or horizontal
sections near the flammable wall.
83103600 - 1.0 - 14/12/2022
EN EN
13 13