Keba b-serie Manual página 13

1 Authorization functions
1.1 About this manual
CAUTION!
This manual is a supplement to the "User manual". You must comply with all instructions
and safety notes in the user manual!
Install the charging station according to the "Installation manual".
Validity
This manual is valid for special versions of the following device series:
● KeContact P30 b-series
● KeContact P30 c-series
Allocation via product code (on nameplate):
KC-P30-XXXXXX⃟X-XX⃝
⃟ = 1...b-series, 2...c-series, 3...c-series
⃝ = R...RFID, K...Keyswitch
Firmware version
Note
Please run a firmware update as necessary to obtain the full scope of functions described. Addi-
tional information, instructions and the firmware can be found at:
↪ http://www.keba.com/de/emobility/service-support/downloads/downloads
1.2 Explanation of terms
Authorization functions
Authorization
Special versions provide the option to make starting a charging session dependent
on certain preconditions. The following versions are available:
● Enabling via keyswitch.
● Enabling via SmartHome interface.
● Enabling via external input [X1].
● User identification via RFID card.
en - 13/112