Casals CID2050B Manual Del Usuario página 15

Measured sound level determined according
EN 62841-1
The vibration emission level given in this
information sheet has been measured
according EN 62841-1 may be used to
compare one tool with other. It may be used for
a preliminary assessment of exposure
The vibration value during actual use of the
power tool can differ from the declared total
value depending on the way in which tool is
used
It's necessary identify safety measures to
protect the operator that are based on an
estimation of exposure in the actual conditions
of use (taking account of all parts of the
operating cycle such as the times when the tool
is switched off and when it is running idle in
addition to the trigger time).
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you
wish to dispose of the product once
its working life has ended, take it to
an authorised waste agent for the
selective collection of Waste from
Electric and Electronic Equipment
(WEEE).
This symbol means that product
may include a battery or batteries;
user must to remove them before
disposing of the product. Remember
that batteries must be disposed of in
duly authorised containers. Do not dispose of
them in fire.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
To remove the batteries, once the life of the
appliance has ended, proceed as follows:
Open the top shell of the battery, removing
previously with the help of a screwdriver fixing
screws, Identify the battery wires and cut their
(Red and Black). To avoid risks of a short
circuit with a possible residual battery load,
first cut the red wire and protect it by using
insulating tape, then proceed to cut the black
wire proceeding in the same way.
Safely remove the battery from its housing.
This symbol means that user must
to consult safety warnings and
instructions thoroughly before use.
DECLARATION OF CONFORMITY
We hereby declare, under our own
responsibility, that the CASALS products
described in this manual CID2050B,
CID2050BC comply with the following
standards: EN 62841-1, EN 62841-2-1,
EN 55014-1, EN 55014-2 and EN 62321 in
accordance with EU Directives 2006/42/EC,
2014/30/EU and 2011/65/EU.
CASALS POWER TOOLS S.L.
M. García
Standards&Approvals
Av. Barcelona s/n
Oliana, 25790, Lleida SPAIN
05/05/2022