Changing The Measurement Display Mode (F2) - Nikon MONARCH 3000 STABILIZED Manual De Instrucciones

„ Changing the measurement display mode (F2)
„
Horizontal distance mode and actual distance mode can be switched. Factory
default setting is horizontal distance mode.
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button.
3. Press the MODE button twice.
• You can now change the measurement display mode.
4. The setting switches every time you press the PWR button.
Horizontal distance mode
• If you press and hold the MODE button or do not operate the buttons for about 8 seconds, the
displayed setting is saved and the Laser Rangefinder returns to standby.
• The setting is saved even when the Laser Rangefinder is turned OFF.
Horizontal
distance
N/A Actual distance mode
N/A
En
Es
Fr
Pb
Actual
distance
15