Look A-STEM Manual De Montaje página 5

GB
Congratulations!
You have chosen a LOOK accessory.
We thank you for your confidence in our
products.
By choosing this LOOK accessory, you are
about to enjoy the advantages of a high-
technology product of French design.
Like the vast majority of LOOK products, it
is identical to those supplied to the large
professional teams, is checked throughout
the manufacturing process and will give you
complete satisfaction.
Our products conform to the various current
European and international standards.
Before use, please read these
instructions fully and follow the advice
they give, in order to benefit fully from
the features of this top-quality product.
LOOK reserves the right to change
product specifications without prior
notice.
8
PRESENTATION OF THE PRODUCT
The aluminium A-STEM is an integrated
stem implementing the Direct Drive concept
developed by LOOK, i.e. optimization of
the steering for the purpose of obtaining
maximum rigidity, dependability and safety
to reach maximum performance.
It adapts to 28.6 mm (1'1/8) diameter steerer
tubes and is designed to receive a 31.8 mm
diameter handlebar (max. length 720 mm).
The A-Stem exists in the following lengths
and inclination angles:
80 - 90 - 100 -110 - 120 mm
+/- 5 mm and +/-15 mm
This allows for an amplitude of 30 mm for the
adjustment of the height of the handlebar,
every 10 mm.
WARNING:
This LOOK accessory is designed and
optimized to be used by cyclists that do
weigh notmore than 100 KG (220 lbs).
DETAILED VIEW OF THE A-STEM
5
3
1
2
1: Cap screw (X4)
2: Stem cap
3: Stem body
4: Compression screw
GB
Fig 1
4
6
7
8
5: Compression cap
6: Compression kit*
7: Stem tightening screw on steerer tube (X2)
8: Rubber spacer*
*
Items supplied with the frame
9