Accessories assembly:
Long crevice nozzle:
Features a narrow nozzle that makes quick work of vacuuming tight spaces such as cor-
ners and hard to reach areas.
1. Firstly, with the appliance OFF, insert the long crevice nozzle into the main unit via the
connector. It will "click" into place (FIG. 3).
2. Switch on the appliance and vacuum.
2 in 1 mini corner and furniture brush:
Use this for vacuuming fabric furnishings such as sofas armchairs and curtains.
3. Firstly, with the appliance OFF, insert the 2 in 1 mini brush into the main unit via the
connector. It will "click" into place.
4. Switch on the appliance and vacuum.
PetCare accessory (*):
This accessory is specially designed to comb and vacuum your pet's hair.
1. Firstly, with the appliance OFF, insert the flexible hose into the main unit an attach the
vacuum brush.
2. Select the desired comb for long or short pet's hair and fix it. It will "click" into place.
3. Switch on the appliance, and gently comb your pet's hair by following the direction of
hair growth (never against the grain). Repeat this step several times until the comb will be
full of hair.
4. Press the button on vacuum brush. The tab will move onwards, and the hair will be va-
cuumed. Note: if there is a lot of hair, press the suction button several times.
(*) available according to model
BEFORE FIRST USE
1. Put the unit to the wall mount.
2. Ensure that the air vent and suction pipe are free from blockages and dust. Should they
suddenly clogged, switch off the appliance immediately and clear the blockage before at-
tempting to use the vacuum again.
3. Remove any sharp or large objects from the path before using this vacuum as these may
damage the appliance irreparably.
Battery charging:
Important: The handheld vacuum cleaner will not work when it's charging.
1. Place the unit near an electrical power outlet and plug in the charger. (FIG. 4)
2. Connect the charger to the charging socket. The battery status indicator lamp will dyna-
mically shine to indicate that the vacuum cleaner is property connected to the charger and
that the unit is being charged.
3. When it is fully charged, "100" will be shown on the display screen and the blue light
on the battery pack will be permanent on. The screen will shut off 10 minutes after fully
charged.
If the charging is made with the battery separated from the main unit, the blue light will
blink when it is charging and will be all the time on when the power is full (FIG. 5).
Note: If the vacuum cleaner is charging or with low battery status, the vacuum cleaner will
not work.
24