UFESA AE Sahara Manual De Instrucciones página 25

Disassembly of battery pack:
Press the battery pack release button and pull it according to the direction shown on the
picture (FIG. 6).
INSTRUCTIONS OF USE
CAUTION: The vacuum must be fully charged before using for the first time.
1. Remove the vacuum cleaner from the wall mount. If using as a handheld unit, disassemble the
tube and attach the desired accessory. 2. Use the power ON/OFF button to turn on the appliance.
3. Select the proper operation and function through the digital display.
4. For a stronger suction, press the power adjustment key to increase the strength, ideal when
you are cleaning carpets with a high pile.
5. To turn off the vacuum, press the power ON/OFF button again.
OPERATION AND FUNCTION OF THE DIGITAL DIS-
PLAY (FIG. 7)
5a Suction power LED
Remaining battery auto-
5b
nomy (%)
Dust container full indi-
5c
cator
5d Power adjustment key
5e Motor working
5f Auto mode
5g Battery symbol
5h Brush block indicator
The display will be off about 10 minutes after the unit is fully charged.
Shows suction power with an intuitive LED strip
Shows the digital number when the unit is
charging or during use. The battery power is full
when the number is showing "100"
Red light is flashing when the dust container is
full and needs to be cleaned
Touch the switch button and select the desired
power between ECO / Medium / High / AUTO.
The light indicator on the cover will change:
ECO (green) / Medium (blue) / High (red) / Auto
(green, blue or red)
Shows that the unit is in use
Automatically adjusts suction power according
to the dirt detected
It is flashing when the unit needs to be charged:
the blue light is flashing during charging and
remains blue when it is fully charged
The LED brush error lock is flashing when the
brush is locked by some foreign matter that
needs to be cleaned and the unit is OFF
25