Leviton 6000 Serie Manual De Instalación página 12

4 INSTALLATION
4.2 Wiring (Continued)
4.2.2 Connection to the electrical network and to the loads
The Series 6000 can be used on single-phase, two-phase or three-phase circuits.
6.2.1 Configurable loads based on the network type
The table below summarizes the load that it is possible to configure depending on the type of network
at the installation.
Network type
1P+N single- phase
2P two-phase
2P+N two-phase
3P three-phase
3P+N three-phase
6.2.2 Description of the main network and load combinations
Legend:
3P+N – 3CT
Three phase + Neutral
network with 3
current sensors.
= CTSxx / CRSxx sensors
Configurable load
1P+N – 1CT
2P – 1CT
2P+N - 2CT
3P – 3CT / 3P – 2CT / 3P – 1CT
3P+N – 3CT / 3P+N – 1CT
L1
L2
L3
N
Voltage terminal
V1 V2 V3 VN
V
3 = Balanced load
9
Current sensor (CT)
Three phase load
3 + N
Current terminal
I01 I02 I03
I
= Unbalanced load
3