1 WARNINGS AND CAUTIONS
WARNINGS:
• TO AVOID FIRE, SHOCK, OR DEATH: TURN OFF POWER at circuit breaker or fuse and test that power
is off before wiring!
• TO AVOID SHOCK, BURN, OR ARC FLASH: DO NOT CLAMP OR PULL OUT NON-INSULATED
CONDUCTORS CARRYING DANGEROUS VOLTAGE!
• FAILURE TO COMPLY WITH THE INSTALLATION INSTRUCTIONS WARNINGS AND CAUTIONS CAN
CAUSE BODILY INJURY, ELECTRIC SHOCK, BURNS, DEATH OR DAMAGE TO PROPERTY.
• Only electricians or other qualified personnel should install or remove the product
• To be installed and/or used in accordance with appropriate electrical codes and regulations.
• DO NOT attempt to repair the product.
CAUTIONS:
• Only use Leviton approved accessories.
• Contact Leviton for any questions regarding the disposal of the product.
• When the ambient temperature exceeds +50°C, the minimum temperature rating of the copper cable to be
connected to terminal must be +85°C .
• Always connect the current transformers using the recommended connection RJ12 cables and observing
the maximum prescribed currents.
• Auxillary power supply input terminal maximum voltage is 400 VAC.
• The product is designed only for the application specified in the operating instructions.
• The network frequency indicated on the device is observed: 50 or 60 Hz.
• The device must be positioned within an installation which complies with the standards currently in force.
• Failure to follow these precautions could cause damage to the device.
• SAVE THESE INSTRUCTIONS.
1