Tristar AC-5560 Manual De Usuario página 13

TROUBLESHOOTING
Troubles Possible Causes
The unit does not • Water full
start when pressing indicator lamp
power button. blinks and water
tank is full.
• Room
temperature is
higher than the
setting
temperature.
(Electric heating
mode)
• Room
temperature is
lower that the
setting
temperature.
(Cooling mode)
The unit doesn't cool
enough.
Suggested
Remedies
• Drain the water
out of the water
tank.
• Adjust the
temperature.
Auto Power-Off in
heating mode.
Instruction manual
• The doors or • Make sure all the
windows are not windows and
closed. doors are closed.
• There are heat • Remove the heat
sources inside the sources if
room. possible.
• Hot air exhaust • Connect or clean
hose is not the hot air
connected or exhaust hose.
blocked. • Reset the
• Temperature temperature.
setting is too high. • Clean the air inlet.
• Air inlet in
blocked.
• Heating • Allow room
protection, when temperature to
the temperature cool before re-
at the air outlet starting the unit.
exceeds 70
degrees, the unit
will power off
automatically.
EN
13