cecotec MAMBO TOUCH Manual De Instrucciones página 31

ENGLISH
- The pre-set functions are selected from the turbo icon by turning the selector dial to
choose them and pressing it to confirm them:
- Stew Function (A): in this mode, the food processor offers the best cooking results by
alternating between speed 1 and speed 0; you can also set temperature, heating power,
and time to your liking.
- Bakery Function (B): in this mode, the food processor sets the optimum speed for the best
kneading, and you can also set the time to your own liking.
- Smoothie-Maker Function (C): in this mode the food processor sets the optimum speed
for the best smoothie results. The default setting is 2 minutes, but you can change it if you
wish.
- Chopper Function (D): in this mode, the food processor automatically sets different and
optimal speeds to achieve the best results when chopping your ingredients. The default
setting is 2 minutes, but you can change it if you wish.
- Auto-Cleaning Function (E): in this mode, the food processor will heat the water up to 70
degrees and then perform two cleaning cycles.
Warning
- After a few minutes, the food processor will enter standby mode. To restart it, press the
Start button.
- Once the setting has been confirmed, it will take a few seconds for the Mambo food
processor to start operating. The same will happen when you pause or end a function: it
will take a few seconds before you can unlock the system and open the lid and/or remove
the jug from the food processor.
Timer
- The TFT display shows the time indicator (hours: minutes: seconds).
- Press on the hours/minutes/seconds based on the time you want to set, and it will start
flashing; turn the selector dial to set the desired time.
- If you press on the timer during the cooking process, the food processor will start the
countdown directly.
- At the end of the countdown, the food processor will beep.
Speed
- Press this button in standby mode or during the cooking process. The appliance will enter
speed-setting mode. The signal on the TFT display will flash. It will then be possible to
adjust the speed. Turn the selector dial clockwise to choose the desired speed.
- The speed range is from 0 to 10.
- If the timer has not been set, the food processor will operate with the pre-set times:
- Heating (without blending): max. 12 hours.
- Blending (speed 1-4): max 1 hour.
- Beat (speed 5-10): max. 5 mins.
60
- There is a speed transfer in the structure, so it is normal to hear a faint noise before the
engine starts running and in the shift between speeds 5 and 6.
Temperature
- Press this button in Standby mode or during the cooking process. The appliance will enter
speed-setting mode. The signal on the TFT display will flash. It will then be possible to
adjust the temperature. Turn the selector dial to select the desired temperature.
- Temperature range: 37-120 °C.
Heating power
- Press this button in Standby mode or during the cooking process. The appliance will enter
speed-setting mode. The signal on the TFT display will flash. It will then be possible to
adjust the heating power. Turn the selector dial to select the desired heating power.
- The heating-power range is from 1 to 10.
- It will not work if the heating power is selected but the temperature is not. It is recommended
to follow the default settings when choosing different temperature levels.
ScreenBlock
Activating the ScreenBlock function (child lock): If you want to lock the screen functions, press
the padlock icon at the top left of the main screen. A POP UP will then appear asking if you want
to lock the screen. To unlock, touching the screen or pressing the selection button will light up
an icon indicating "Swipe up to unlock" (as with smartphones) and you will be able to swipe up
on the screen to unlock.
Stopwatch:
To start the stopwatch function, go to the manual-cooking screen and press the timer icon,
enter the desired value, and leave speed, temperature, and heating power parameters at "0".
Then, press the selection button to confirm. A POP UP will appear warning that values are at
"0". If we wish to continue, confirm for the countdown to begin.
Scale
- Electronic scales can help control the amount of ingredients more conveniently.
- 0000 will be shown on the TFT display. You can add ingredients based on your needs.
- The maximum weight is 5000g.
Warning
To use the scale, it is necessary to unlock the jug's lid.
Turbo
- Press this button during Standby mode to activate pre-set functions or to activate Turbo
mode.
- The preconfigured functions range from A to E.
ENGLISH
MAMBO TOUCH 61
MAMBO TOUCH CON JARRA HABANA