cecotec CECOFRY PIXEL 2500 TOUCH0 Manual De Instrucciones página 42

ENGLISH
Box content
- Cecofry Pixel 2500 Touch air fryer
- Instruction manual
Clean the rack and the inside of the basket with hot water, detergent, and a non-abrasive
sponge.
This appliance is an oil-less fryer. Do not pour oil inside the basket.
3. OPERATION
1. Place this appliance on a stable, horizontal, heat-resistant surface. Do not place objects
on the appliance or in front of the air outlet.
2. Place the rack inside the basket and place the food on it.
3. Plug the appliance to a power supply.
4. Press the Power/Pause icon to turn on the appliance. All icons will light up.
5. Select the desired default cooking programme according to the recipe you want to cook
by pressing the Mode Selection icon. These modes can be manually customised by
pressing the Time/Temperature icon and changing the values with the Increase icon and/
or Decrease icon. Note that the custom changes applied will not be saved for the next
recipe you wish to make using the same mode.
6. You can also set the values manually by pressing the Time/Temperature icon every
time you want to change one of these two values, then press the Increase icon and/or
Decrease icon to change the value to your liking. Pressing and holding the Increase icon or
Decrease icon will increase or decrease the temperature value by 5 °C and the time value
by 1 minute.
7. Once the mode and/or values have been set, press the Power/Pause icon to start cooking.
When cooking starts, only the top icons will stay on. The time and temperature values can
be changed during cooking.
8. To cancel the cooking process, press and hold the Power/Pause icon for 3 seconds.
Default cooking programmes
The below table shows the temperatures and times of the default cooking programmes.
PROGRAMME
Chips
Beef steak
42
CECOFRY PIXEL 2500 TOUCH
TEMPERATURE (ºC)
200
170
TIME (min) STIRRING
20 YES
17 YES