Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
Weight hazard. ALWAYS have assistance when lifting
the generator.
1. Carefully open the carton.
2. Remove and save the carton contents.
3. Remove and discard the packing tray.
4. Unfold the top of the plastic bag enclosing the generator.
5. Carefully cut the vertical corners of the carton to access
the generator.
6. Recycle or dispose of the packaging materials properly.
CARTON CONTENTS
• User Manual
• Quick Start Guide
• Bottle of SAE 10W-30 Oil
• Spark plug socket wrench
• Oil Funnel
• Assembly wrench
• Wheel and lifting hook components
Item
• Lifting hook
• Flange bolt, M8
• Wheel
• Axle pin
• Washer
• Cotter pin
If any parts are missing, contact our service team at
service@wpowereq.com or call 1-855-944-3571.
INSTALL WHEELS AND LIFTING BRACKET
Assembling the generator will require lifting the unit on
one side. Install the wheels before adding fuel or oil.
Lifting hazard. Use two people when installing the
wheels. Refer to LIFTING HOOK in the OPERATION
section.
1. Place generator on a flat surface.
2. Align the lifting hook bracket with the mounting brackets
Quantity
1
4
2
2
4
4
NOTICE
on the top of the fuel tank. Secure with four M8 flange
bolts.
3. Use the Lifting Hook to raise the unit enough to install
the wheels as shown.
Note: The wheels are only intended for hand transport.
The wheels are not suitable for towing the generator
either on or off-road.
INITIAL OIL FILL
THIS GENERATOR HAS BEEN SHIPPED WITHOUT
OIL. DO NOT attempt to crank or start engine before
it has been properly serviced with recommended oil.
Failure to add engine oil before starting will result in
serious engine damage.
Use of 2-stroke/cycle oil or other unapproved oil types
can cause severe engine damage that is not covered
under warranty.
The included, recommended oil type for typical use is
10W-30 engine oil. If running the generator in extreme
temperatures, refer to the following chart.
Westinghouse Outdoor Power Equipment, LLC | 13
ASSEMBLY
NOTICE
NOTICE
Publicidad
