Pioneer X-HM15-K Manual De Instrucciones página 23

Using the tuner
Chapter 7:
Using the tuner
Listening to the radio broadcasts
The following steps show you how to tune in to FM and AM (X-
HM15/HM15BT) radio broadcasts using the automatic
(search) and manual (step) tuning functions. Once you are
tuned to a station you can memorize the frequency for recall
later. See Saving station presets below for more on how to do
this.
STANDBY/ON OPEN/CLOSE
 
CD USB TUNER
AUDIO IN
BT AUDIO CLOCK/TIMER SLEEP
EQUALIZER
1 2 3
P.BASS
4 5 6
BASS/TREBLE
7 8 9
RANDOM
CLEAR REPEAT
0
DISPLAY FOLDER
TUNE+
Tuning
Press the  STANDBY/ON to turn the power
1
on.
2 Press TUNER repeatedly to select desired
frequency band (FM or AM).
3 Press TUNE +/– on the remote control to
tune in to the desired station.
Automatic tuning:
Press and hold TUNE +/–, scanning will start automatically
and the tuner will stop at the first receivable broadcast
station.
Manual tuning:
Press the TUNE +/– repeatedly to tune in to the desired
station.
Note
• When radio interference occurs, automatic tuning may
stop automatically at that point.
• Automatic tuning will skip weak signal stations.
• To stop the automatic tuning, press .
• When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed first. Finally, the station
name will appear.
DISPLAY TUNE+ FOLDER
ENTER
MEMORY
MENU /PROGRAM
PRESET TUNE– VOLUME
+ +
MUTE
– –
DIMMER
 

  
RDS
ST/MONO ASPM PTY DISPLAY
• Full auto tuning can be achieved for RDS stations using
Auto Station Program Memory (ASPM) mode, see
page 25.
To receive an FM stereo transmission:
Press ST/MONO to select stereo mode and "AUTO" will be
displayed.
Improving poor FM reception:
1 Press ST/MONO repeatedly to select MONO.
This will change the tuner from stereo to mono and usually
improve the reception.
Saving station presets
If you often listen to a particular radio station, it's convenient
to have the receiver store the frequency for easy recall
whenever you want to listen to that station (Preset tuning).
This saves the effort of manually tuning in each time. This unit
can memorize up to 45 stations.
(X-HM15/HM15BT : FM 30 stations/AM 15 stations,
X-HM15BTD : FM 30 stations/DAB 10 stations)
0
DISPLAY FOLDER
TUNE+
ENTER
MEMORY
MENU
/PROGRAM
PRESET VOLUME
TUNE–
+ +
MUTE
– –
 
DIMMER
1 Tune to a station you want to memorize.
See Tuning above for more on this.
2 Press MEMORY/PROGRAM.
The preset number will flash.
3 Press PRESET +/– to select the preset
channel number.
4 Press MEMORY/PROGRAM to store that
station in memory.
If the preset number has changed from flashing to lighting,
before the station is memorised, repeat the operation from
step 2.
• Repeat steps 1 to 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
CLEAR REPEAT RANDOM
0
DISPLAY FOLDER
TUNE+
ENTER
MEMORY
MENU
/PROGRAM
PRESET VOLUME
TUNE–
+ +
MUTE
– –
07
23
En