Publicidad
Idiomas disponibles
Idiomas disponibles
1. Hold the circular saw with both hands, one hand on the
main handle (8) and the other on the auxiliary handle
(10);
2. Press the lock/unlock button (9) and the "ON/OFF"
switch (7) simultaneously. If you do not press the
lock/unlock button, the "ON/OFF" switch remains
locked;
3. Push the circular saw in the desired cutting direction;
4. To switch off the circular saw, release the "ON/OFF"
switch.
The cutting position can be checked in two ways, on the
indicator on the base plate and via the LED cutting line
indicator.
1. There is a cutting position indicator (15) on the base
plate (2) for bevel and vertical cuts. This indicator is used
to guide the saw along the cut lines marked on the
workpiece. The cutting position indicator is aligned with
the left side of the blade;
2. A LED cutting line indicator (11) is located on the fixed
blade guard (4). It indicates the cutting position on the
parallel guide ruler, the base plate, and illuminates the
cutting path to be followed on the workpiece.
The LED light stays on as long as the "ON/OFF" switch
lock/unlock button (9) or the "ON/OFF" switch (7) remains
pressed. When you release the buttons, the LED goes out.
Before performing cleaning, adjusting, repairing and
maintenance work, remove the battery from the circular
saw.
The circular saw does not require any additional lubrication
or maintenance. However, you must perform regular
cleaning for a continuous and trouble-free operation.
Always keep the blade clean and sharp. Properly cared
blades jam less frequently, are more easily controlled, and
allow greater efficiency during operation of the machine.
Cleaning
After each use, remove all debris and clean all circular
saw's parts. Wipe the power tool with a clean, damp cloth
or blow it with low pressure compressed air. Careful
handling protects the power tool and extends its service
life.
The circular saw and its ventilation slots must be kept
clean. Clean ventilation slots regularly or when they
become blocked.
Storage
When not in use, store the circular saw in a dry, clean place,
free of corrosive smoke and out of children's reach.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp:
+351 965 157 064
E-mail:
support@vito-tools.com
Publicidad
