Publicidad
Idiomas disponibles
Idiomas disponibles
FINAL INSTALLATION
2.
Partially insert three blade screws (AA) along with
three blade washers (BB) into holes in blade (G) to
attach blade arm (H) to blade (G). Then, tighten
each blade screw (AA) starting with the one in the
middle.
Repeat Step 3 for remaining blades (G) and blade
arms (H).
Hardware Used
AA
Blade Screw
BB
Blade Washer
Attach blade arms (H) to the bottom of motor
3.
housing (D) with motor screws (J) and lock
washers (K) previously removed (Step 5, page 7).
Tighten motor screws (J) securely.
Note: Make sure to completely secure each blade
arm (H) before proceeding to the next.
4.
Remove the three preassembled switch housing
screws (P) from light kit fitter (F).
Locate the BLUE (or BLACK) and WHITE wires in
the switch housing preassembled on motor housing
(D) that are labeled FOR LIGHT and remove plastic
from these two wires.
2
AA
BB
x 15
H
x 15
3
K
J
J
4
P
Switch
Housing
Lowes.com/harborbreeze
12
G
D
G
H
P
F
D
BLUE (or BLACK)
WHITE
Publicidad
