Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
2.
Power is adjusted as with any other cooking zone.
Using the Bridge Zone as two separate cooking zones:
To use the Bridge Zone as two separate cooking zones with different power settings, press the
Bridge-function touch icon again: the cooking zones will revert to the previous settings.
Using the Bridge Zone
Select one of the Bridge Zone cooking zones and adjust the power level. Then, press the
1.
Bridge-function touch icon. The power setting will be applied to both Bridge Zone cooking
zones, as well as any setting changes (Fig. 14).
2.
To disable the Bridge function, select one of the Bridge Zone cooking zones, then press
the Bridge-function touch icon: the Bridge function will be disabled, and the power level
of the cooking zone(s) will return to "0" (Fig. 15).
Using the BBQ function for models 02511_Bolero Squad I 3100 FullFlex and 02512_Bolero
Squad I 4100 FullFlex
The BBQ function can be used in the Bridge Zone and allows the surface temperature of
cookware to be maintained at an ideal level for grilling.
1.
Press the cooking-zone selection touch icon to select the desired cooking zone: the icon
and the corresponding indicator will flash. Then press the BBQ touch icon to enable the
BBQ function. The control panel will display "b" and "q".
2.
To disable the BBQ function, first select the cooking zone, then press the BBQ touch icon
to disable it. The power level of the cooking zone will return to 0.
Using the Keep Warm function
The Keep Warm function is useful for keeping food warm.
1.
Press cooking-zone selection touch icon of the cooking zone on which you wish to apply
the Keep Warm function: the corresponding indicator will flash.
2.
Press the Keep Warm touch icon: the cooking zone indicator will show "A".
3.
If you wish to disable the Keep Warm function, press the cooking-zone selection touch
icon, then press the Keep Warm touch icon. The power level of the cooking zone will
return to 0.
Using the Stop&Go function
The Stop&Go function can be enabled at any time during cooking. It allows you to pause the
induction hob and then resume cooking.
1.
Make sure the cooking zone is running.
2.
Press the Stop&Go touch icon: the indicator of the corresponding cooking zone will show
"II" and all cooking zones will be switched off. However, it will still be possible to use the
Stop&Go touch icon, the Power touch icon, and the Lock touch icon.
3.
To resume cooking, press the Stop&Go touch icon: the cooking zone will return to the
previously selected power setting.
B O LE R O S QUAD I 3 10 0/3 10 0 FULLFLE X/4100 FU LL F L EX
68
Locking the touch icons
-
The icons can be locked to, e.g., prevent children from accidentally switching on the
cooking zones.
By pressing the Lock touch icon, all icons will be locked, except the Power touch icon.
-
Locking the hob
Press the Lock touch icon. The timer indicator will show "Lo".
Unlocking the hob
1.
Make sure the induction hob is switched on.
2.
Press and hold the Lock touch icon to unlock the icons.
Resume use of the hob.
3.
When the hob is locked, all touch icons are disabled except the Power touch icon for possible
emergency shutdown. Should it be the case, it will be necessary to unlock the icons upon
switching the hob back on.
Using the timer
The timer can be used in two ways:
You can use it as a minute counter. In this case, no cooking zone will be switched off once
-
time elapses.
-
In minute-counter mode, the timer can be set to switch off a cooking zone after the set
time has elapsed.
The timer can be set for up to 99 minutes.
-
Using the timer as a minute counter
If no cooking zone is selected:
Make sure the hob is on.
1.
2.
Press the Timer touch icon: the corresponding indicator will flash, and the control panel
will display "00" flashing.
3.
Adjust the time by sliding your finger on the slider.
Press the Timer touch icon again: "0" will flash.
4.
5.
Adjust the time by sliding the slider. Time can be set for up to 65 minutes.
6.
Once the set time has elapsed, an acoustic signal will sound for 30 seconds, and the
indicator will show "– – ".
Setting the timer to switch off a cooking zone
To set a cooking zone to switch off:
1.
Press the cooking-zone selection touch icon of the cooking zone you wish to set the timer
for (for example, cooking zone 2).
2.
Press the Timer touch icon: the corresponding indicator will flash, and the control panel
will display "00" flashing.
BO LERO SQUA D I 3100/31 00 FULLFLEX/4100 FULLFLEX
ENGLISH
69
Publicidad
