Bosch Zamo Manual Original página 23

alignment (e.g. of wall pictures) in interior areas.
Please note: The use of laser line adapters is not permitted in
some countries.
Tape adapter
The tape adapter is intended for use in combination with the
Zamo digital laser measure for measuring circumferences (e.g.
of vases, pipes, etc.) and lengths of freestanding objects (e.g.
televisions, shelves, etc.) in interior areas.
Wheel adapter
The wheel adapter is intended for use in combination with the
Zamo digital laser measure for measuring distances between
two points (e.g. lengths of material) in interior areas.
Product Features
The numbering of the product features refers to the represent-
ation of the measuring tool in the images.
(1) Display
(2)
Measuring button
(3) USB Type-C® port
(4)
Function button
(5) Rear edge of the measuring tool
(6) Release buttons for adapter
(7) Laser warning label
(8) Laser beam output
Reception lens
(9)
(10) Locking mechanism of the battery compartment cover
(11) Serial number
Bosch Power Tools
A)
1 609 92A 7Z2 | (14.04.2023)
English | 23