Bosch Zamo Manual Original página 26

26 | English
Digital laser measure
Recommended USB Type-C® cable
A) When measuring from rear edge. In unfavourable conditions such
as very strong lighting, a temperature greatly deviating from 20 °C
or a poorly reflecting surface, the measuring range can be restric-
ted.
B) This applies for high reflectivity of the target (e.g. a wall painted
white), weak background lighting and a 20 °C operating temperat-
ure; a deviation of ±0.05 mm/m must additionally be factored
in.In unfavourable conditions such as strong lighting, great heights
or a poorly reflecting surface, and at a temperature of 20 °C, the
deviation can be ±4 mm; a deviation of ±0.15 mm/m must addi-
tionally be factored in
C) Only non-conductive deposits occur, whereby occasional tempor-
ary conductivity caused by condensation is expected.
D) At an operating temperature of 20 °C
The serial number (11) on the type plate is used to clearly identify your
measuring tool.
Adapter
Operating temperature
Storage temperature
Relative air humidity max.
Pollution degree according to
A)
IEC 61010-1
Laser line adapter
Article number
B)
Width of laser line
Length of the laser line
tance
Measuring accuracy
Opening angle
Angle for fine adjustment
Tape adapter
1 609 92A 7Z2 | (14.04.2023)
at a 2 m distance
B)
at a 2 m dis-
C)
Zamo
1 600 A01 L6H
–10 °C to +40 °C
–20 °C to +70 °C
90 %
2
1 600 A02 PZ7
≤ 2.0 m
≥ 1 m
±1.0 mm/m
≥ 28°
±10°
Bosch Power Tools