cecotec CECOMIXER MERENGUE 5L 1200 Manual De Instrucciones página 29

3. OPERATION
Using the appliance
1. Insert the accessory into the device (accessories can only be inserted into the device and
rotate if they are correctly fixed; the protective disc of the accessory prevents the shaft
from coming into contact with the ground).
2. Then, fit the cover (8) and snap it into place.
3. Press the unlocking trigger (3) and lower the hinged arm (1). Make sure it is fitted to the
lower part of the structure. You can check by its fixed position and by hearing a "clack"
when it locks into place.
4. Connect the appliance to the socket after making sure that no power is selected.
5. The power selector (2) can be adjusted to the desired speed. The following are the
recommended speed settings for different uses.
- Kneading hook (7): for heavy doughs with yeast, using speed 1 or 2.
- Kneading whisk (6): for a wide variety of ingredients such as shortcrust pastry, mashed
potatoes, pie filling, icing, etc. Use speeds 4, 5 and 6 according to your needs.
- Beating Whisk (5): for whipping cream, eggs (whole, yolks or whites) or pudding, on high
speed (4, 5 and 6).
- For short, powerful and continuous movements, turn the knob repeatedly to the P
position.
6. When you have finished using the stand mixer, turn the control knob to 0.
7. Press the unlocking trigger (3) and lift the hinged arm (1). Then remove the lock fitting and
the cover.
8. Unplug the power cable.
9. After each use, clean all parts and components that have come into contact with food.
CECOMIXER MERENGUE 5L 1200 / ICE-CREAM
ENGLISH
29