Sonel CMP-1010 Manual De Uso página 63

WARNING
To avoid electric shock, do not use the meter if the bat-
tery compartment cover is not in place or is not
properly fastened.
CMP-1010 is powered by by three LR03 AAA 1.5 V batteries. It
is recommended to use alkaline batteries.
To replace the batteries:

set the rotational function selector at OFF,

remove test leads from the terminals of the meter.

turn the fixing screw of the compartment cover to the position:

remove the cover,

remove the batteries and insert a new ones, observing the polarity,

put on the cover and turn the fixing screw to the position:
 While performing the measurements with the low battery
symbol displayed, the user must be aware of additional
measurement uncertainties or unstable operation of
the device.
 If the meter does not work properly, check the batteries
in order to ensure that they are in proper condition and
properly installed in the device.
7 Replacing the batteries
CMP-1010 – USER MANUAL
61