Printing All Images On A Memory Card - Sony SnapLab UP-CR10L Manual De Instrucciones

Printing All Images on a
Memory Card
This function lets you print all images stored on a memory
card in one operation, producing one print per image.
The function is available in Quick Print mode.
1
Touch any place on the screen.
The language selection screen appears.
Memo
When only one language was selected at the
administration screen, the language selection screen
does not appear. Instead, the Main Menu appears. In
this case, proceed to step 3.
2
Touch the language you want to use.
Precautions about using the unit are shown. Read these
carefully and then touch the [OK] button.
42

Printing All Images on a Memory Card

3
Insert the memory card into the respective slot on the
front side of the unit.
When the memory card is recognized, the Main Menu
appears.
4
Touch [Print All Images].
The order contents are shown.
5
Verify the order contents and enter the password.
For details on this operation, see "Verifying Order
Contents and Entering a Password" on page 34.
If the number of images on the memory card is higher than
the maximum allowable number of prints per order, the
image list screen will appear after the Main Menu, with the
number of images corresponding to the maximum number
being selected. You can then proceed to print these images,
or change the image selection.