Publicidad
Idiomas disponibles
Idiomas disponibles
Storage, Transportation, and Mounting
Mounting the Table Saw
(Fig. 35, Fig. 36)
To prevent personal injury, al-
ways disconnect plug from
power source before performing any assembly,
adjustment, or repair.
To prevent movement while cutting, the table saw
must be fastened securely to a stand or workbench,
using the four Mounting Holes 34.
If mounting the saw to a workbench, the Base 5
should be secured using four 3" (77 mm) long
screws (not included) through the Mounting Holes
34. Make sure the screws extend through the saw's
frame and securely attach into the supporting work
surface.
Fig. 35
1609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 30
1609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 30
Fig. 36
34
34
5
34
34
front
front
of saw
of saw
-30-
34
34
rear
rear
34
34
of saw
of saw
34
34
4/20/2023 11:23:29 AM
4/20/2023 11:23:29 AM
Publicidad
