Bosch GTS15-10 Instrucciones De Funcionamiento Y Seguridad página 44

Idiomas disponibles

Fig. 64

106

Fig. 65

9 9

1609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 44

Basic Table Saw Operations

4" (102 mm)

3/4" (19 mm)

4-1/2" (114 mm)

or more

106

Making Miter Gauge Auxiliary Facing

(Fig. 66)

The Miter Gauge 14 has pre-molded features that

allow for the attachment of an Auxiliary Facing 107.

To make the Miter Gauge Auxiliary Facing 107, it

is recommended to select a smooth straight wood

board that is 3/4" thick, 3" high, and desired length.

1. Using the Miter Gauge 14 as a template, drill

1/8" (3 mm) diameter holes though the board.

2. Attach the board to the Miter Gauge 14

with two round head Wood Screws 108,

No. 10x 3/4" or M5 x 20 mm (not included).

Be sure the screws never protrude above the out-

side surface of the facing.

Be sure the facing does not interfere with the prop-

er operation of the Barrier Guard Assembly 26.

NOTE: When bevel crosscutting, attach the facing

so that it extends to the right of the Miter Gauge

14, and use the Miter Gauge 14 in the groove to the

right of the Blade 31.

Fig. 66

108

-44-

107

4/20/2023 11:23:52 AM