Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Blade Bevel Lock Handle
Elevation Wheel hard to move.
Rip fence will not correctly
clamp to rails.
1609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 61
1609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 61
Troubleshooting
Cause
Blade Bevel Lock Handle 3 not
loosened.
Saw dust on the threads of the
Threaded Elevation Rod 118.
Undercarriage filled with saw
dust.
The Rip Fence 9 is not fully
seated on the Rails 10.
-61-
Corrective Action
See the "Blade Bevel Lock Han-
dle" explanation in "Getting to
Know Your GTS15-10 Table Saw"
on page 12.
See "Cleaning" on page 57.
Frequently blow out any dust that
has accu mulated in the undercar-
riage, motor, or blade elevation
gears.
Make sure that both ends of the
Rip Fence 9 are fully seated flush
against the Rails 10 before trying
to latch the Rip Fence Lock Levers
55.
4/20/2023 11:24:15 AM
4/20/2023 11:24:15 AM
Publicidad
