37
Dear Customer,
Thank you for purchasing this quality product. Please read the manual very carefully
before using this device. Failure to follow these instructions can cause measuring
abnormality or damage to the Oximeter.
No part of this manual may be photocopied, reproduced or translated into another
language without the prior written consent. We reserve the right to revise and amend
it at any time without prior notice.
Version of the Manual: Ver 1.8
Issued Date: October 12, 2023
All rights reserved.
Notes:
• The contents contained in this manual are subject to change without prior notice.
• Information furnished by Creative is believed to be accurate and reliable. However,
no responsibility is assumed by Creative for its use, or any infringements of patents
or other rights of third parties that may result from its use.
Instructions for Safe Operation
Check the device to make sure that there is no visible damage that may affect user's
safety and measurement performance. It is recommended that the device should be
inspected minimally before each use. If there is obvious damage, stop using the de-
vice.
Necessary service must be performed only by qualified technicians. Users are not
permitted to service this device.
The oximeter must not be used with the devices and accessories not specified in
User Manual.
Warnings
Explosive hazard—DO NOT use the oximeter in environment with inflammable gas
such as some ignitable anesthetic agents.
DO NOT use the oximeter while the Patient is under MRI or CT scanning. This
device is NOT MRI Compatible.
Cautions
Discomfort or pain may occur if using the sensor of this device continuously on the
same location for a long time, especially for the patients with poor microcirculation.
It is recommended that the Oximeter should not be applied to the same location
for longer than 2 hours or less if any abnormal condition is found. Frequently check
and re-position the Oximeter sensor.
Misapplication of a SpO
induce pressure injury.
Place the SpO
circulation, and lead to interstitial edema, hypoxia and inaccurate measurement.
Biocompatibility tests have been performed on all the applied parts, some excep-
probe with excessive pressure for prolonged periods can
2
probe on the finger tightly will cause venous pulse and effect blood
2
ENGLISH