Publicidad
Idiomas disponibles
Idiomas disponibles
Clean the Rolling Brush
Pull on the release tabs to unlock the brush guard, as shown.
Lift the rolling brush to remove. Clean the rolling brush with a cleaning tool.
Reinstall the rolling brush by inserting the fixed protruding end first.
Press down to snap the brush guard into place.
12 EN
Clean the Side Brush
Foreign substances, such as hair, can easily get tangled in the side
brush, so it is best to clean it regularly.
Remove the side brush.
Carefully unwind and pull off any hair or substances that are wrapped
between the main unit and the side brush.
Use a cloth dampened with warm water to remove dust from the
brush or to gently reshape it.
Clean the Sensors and Charging Pins
To maintain the best performance, clean the sensors and charging
contact pins regularly.
• Dust off the sensors and charging contact pins using a cloth or
cleaning brush.
Clean the Swivel Wheel
Hair or dust particles can easily get entangled in the swivel wheel. Be
sure to clean the swivel wheel periodically and as needed.
Wheel
Axle
Pull out the swivel wheel with a tool (such as a screwdriver).
Clean any hair or debris wrapped around the wheel or entangled
inside the wheel cavity.
Reinstall the wheel and push it in until it clicks into place.
• Do not clean the swivel wheel with water.
EN 13
Publicidad
