Publicidad
Idiomas disponibles
Idiomas disponibles
RANGR CONTROL
CANCELSBAKE,
PROGRAM
STATUS
BROIL OR
DISPLAY
CLEAN OPERATION
CLOCK /
TIMER
DISPLAY
!
TEMPERATURE
DISPLAY
FUNCTION
DISPLAY
UP ARROW PAD
(INCREASES TIME
OR TEMPERATURE)
PRESS TO TURN
TIMER ON AND OFF
SET AUTOMATIC
OVEN OPERATIONS
DOWN ARROW PAD
(DECREASES
TIME
OR TEMPERATURE)
Your range Is controlled with a touch. You now have the
ease of setting the following operations:
CLOCK
TIMER
BAKE
DELAY
BAKE
BROIL
CLEAN
DELAY
CLEAN
The UP or DOWN arrow Is used to set an amount of time
or changethetemperature
you want to use° By pressing
and holding down either pad the numbering will change
quickly.
By pressing
and releasing
etther pad the
numbering will change slowly.
DISPLAY:
Once you have programmed
your
control
for any
operaUon, you can display the setting by presslng the
appropriate
pad.
For example,
if you are using the
TIMER and want to see the time of day, press CLOCK.
The display will show the time of day.
TONES:
The end-of-cycle tone will sound at the end of timer use
and automatic oven functions. The end-of-cycle tone is
3 short beeps followed by I beep every 6 seconds that
repeat until you press any operation°
If you would like
to eliminate the repeating beeps, push and hold CLEAR/
OFF for ten seconds.
To return the 1 beep every 6
seconds, push and hold CLEAR/OFF
for 10 seconds.
To cancel the end-of-cycle
tone, press any key except
the UP or DOWN arrow key.
F.CODE:
If the time display beeps continuously
and flashes an
"F" followed by a number, you have a function error
code.
Note the number after the "F".
Press CLEAR/
OFF.
Allow oven to cool for i hour. If problem repeats,
disconnect
all power to the range and call for service.
Advise your service technician of the number following
the =F" in the display.
PRESS
NOTE:
You cannot
set BAKE,
BROIL
or COOK
TIME
while the oven door is in the locked
position.
Utyou try, the word =DOOR" will
appear
in the
display.
The oven
door
lock is to be used for Self-Cleaning
only.
9
NCERCl 8-1
Publicidad
