Publicidad
Idiomas disponibles
Idiomas disponibles
THH SELF=CLEAN
CYCL
(3 NOURS ° NOnMAL CLEAN TAMS)
BEFORE
A CLEAN
CYCLE
1. Remove the broiler pan and grid, oven racks, all
utensils and any foil that may be in the oven. Do not
try to clean utensils or any other objects in the oven
during a self-clean cycle_ if oven racks
are left in
the range during a clean cycle, they will darken,
lose their
luster
and become
hard to slide,
if
you choose
to leave
the racks
in the oven, you
can polish
the edges
of the racks
with
stee!
wool and apply a small amount
of vegetable
oil
to the rack
edges
after
the
sell-clean
cycle.
This will make
the racks
easier
to slide,
2. Soil on the oven front frame, under the front edge of
the cooktop, the door liner outside the door gasket
and the front edge of the oven cavity (about 1" into the
oven) will not be cleaned during a clean cycle (see
illustration below). Clean these areas by hand before
starting a clean cycle.
Use hot water with a soap-filled steel wool pad. We
recommend a cleanser such as 'Soft Scrub®' brand
or a similar cleaning product to keep white surfaces
looking clean and new. After cleaning, rinse well to
help prevent a brown residue from forming when the
oven Is heated. Buff these areas dry with a dry cloth_
Please
Note:
The door gasket
is designed
to have
a 5".6" gap
at the bottom
of the oven door.
This
is to aUow
for proper
air circulation,
DOOR PANEL
GASKET
TO SET A SELF-CLEAN
CYCLE:
1. Slide the door lock handle to the right Into the lock
position. DO NOT force the handle. If it does not slide
easily, it may not be fully extended.
You may also
need to lightly press on the door to lock It properly.
TO LOCK:
OVEN LIGHT.
To prolong
the lifo of the bulb,
be sure
the oven light Is OFF during
Self-Clean,
FRONT
FRAME
2. Push the CLEAN
pad,
The display
will show
"CLEAN",
=TIME",
and (.--),
DOOR LINER
3. Press the UP or DOWN
arrow pad to select
the
amount of time you want the oven to clean.
The
normal cycle is 3 hours, but you can choose between
2 and 4 hours.
3. Wipe up heavy splllovers on the oven bottom. Too
much soil may cause smoking during the clean cycle.
4. Do not rub the door gasket. The fiberglass material of
the gasket has an extremely low resistanceto abrasion.
An intact and well fitting oven door gasket lsessential
for energy efficient oven operation and good baking
results.
If you notice the gasket becoming
worn,
frayed or damaged in any way or if it has become
displaced on the door, you should replace the seal.
You can press the STOP TIME
pad to see the time of
day the clean cycle will be finished.
Push the CLEAN
pad to return to the countdown.
Make sure your oven light is off during a self-clean cycle
to prolong the life of the bulb.
15
NESCL52
Publicidad
