TO SET
THE CLOCK:
t= Press the CLOCK
pad.
"SET"
and
"TIME"
will show in the display.
2. Press eltherthe UP or DOWN arrow pad,
until t he display shows the correct time of
day.
The UP arrow wlll change numbering forward, such as
1, 2, 3.
The DOWN
arrow
will change
numbering
backwards, such as 3, 2, 1.
The clock
will
automatically
start
within
one
minute;
or you
may
press
the
clock
pad
for
immediate
start.
TO RESET
THE
TIMER:
When you are setting the timer, if you pause more than
4 seconds while pressing either the UP or DOWN arrow
pad, "TIMER"
will stop flashing In the display and the
timer will automatically
start
to count down.
if this
should happen just press the TIMER
ON/OFF
pad and
you will be able to continue
setting your time.
TO CANCEL
THE
TIMER:
While the timer is counting down, press and hold down
the TIMER
ON/OFF pad for 4 seconds, or unt li'*TIMER"
quits flashing and the current time of day returns to the
display_
TO SET THE
TIMER:
The timer does not control oven operations, such as
bake, broil, clean or any delay function. It allows you to
set an amount of time and alerts you when that time is up.
An example would be timing a three minute egg. The
maximum
amount of time you may set Is 9 hours and 55
minutes.
1. Press the TIMER
ON/OFF
pad.
"SET"
and
"rIMER"
will flash and "HR"
will
show in the display.
2. Press either the UP or DOWN arrow pad
to set the amount of time you want.
The timer will automatically start to count down within 4
seconds.
*
3.
When the timer counts down to zero a
tone will sound. Press the CLOCK pad to
return to the current time of day.
10
NCCTL44-1