Beha-Amprobe MT204-S Manual Del Usuario página 17

Limit value setting
This function is available in measurement functions R
For limit value setting press the
"–" menu keys to set appropriate limit value.
The "EXIT" function key shall be used to exit limit value setting display.
R MAN
PE
0.51
-
Figure 5: Limit value setting
☞
In case test result comply with set limit value, there are two short
sound signals present after finishing the measurement. In case of non-
compliance, there is a corresponding warning symbol displayed
accompanied with one longer sound signal after finishing the
measurement. The limit value is saved as a parameter of the
measurement result and is transferred to PC in case of data transfer.
"LIM"
Ω
C L 0.51 0.2A
Ω
+
PE
menu key (14), then use the
17
, Z and R .
I ISO
"+" and