Beha-Amprobe MT204-S Manual Del Usuario página 38

Recall data
In order to recall stored measurement result follow the following
instructions:
1) Press the "RCL" menu key (12).
2) Level "CUS" (customer) is already marked. Select wished customer
name by using the
3) Select the next storage level "MAC" (machine) by using the
menu key. Select wished machine name by using the
menu keys.
4) Select the next storage level "LOC" (location) by using the
menu key. Select wished location name by using the
menu keys.
5) Select the next storage level "NO." (measurement number) by
using the
using the
6) Press the "RCL" function key (12) again to recall stored
measurement result. Now it is possible to browse among all
measurement numbers under selected storage address, by using
the "◄" and "►" menu keys.
CUS: CUS 001
MAC: MAC 002
LOC: LOC 99
NO. : 021
Figure 24: Recall address
• Individual recalled measurement results can be deleted by pressing the
"CLR" menu key.
• Storage address with the last stored measurement resuIt is offered always
after activating "Recall" operation.
• If selected storage address is not occupied, "LOCATION EMPTY" appears
on the LC-Display.
"◄" and "►" menu keys.
"▼" menu key. Select wished measurement number by
"◄" and "►" menu keys.
RPE R
38
"▼"
"◄" and "►"
"▼"
"◄" and "►"